Squeezy Toy [0.4mm]

Description

What’s Included

• A1 Mini G-code – Dedicated G-code file specifically prepared for the Bambu Lab A1 Mini.
• Generic G-code – G-code file for other compatible FDM printers.

Note: The generic G-code is intended for compatible FDM printers with at least 5 mm of clearance between the part-cooling fan and the nozzle tip.

Object Size

80mm (Width)

100mm (Width)

Before You Buy

• This is a G-code download, not an STL or 3MF model.
• The toy cannot be re-sliced or modified.
• A 0.4 mm nozzle is required.
• Designed for PETG printing.

How To Print

Using a Bambu Lab A1 Mini?
Use the A1 Mini-specific G-code for a 0.4 mm nozzle. The file can be previewed and sent to your printer from Bambu Studio.
After sending the file, go to the printer and start the print from the printer itself.
This file cannot be modified for use with other printers.

Using another compatible FDM printer?
Use the Generic G-code file. This file can be previewed in most slicers, except Bambu Studio.
To print, copy the G-code directly to your printer using an SD card or USB drive, then start the print from the printer.

Bambu Lab AMS: The provided G-code is set up for filament loaded directly into the printer. If you’re using an AMS, the included G-code won’t be able to control AMS filament selection.

Customising G-code

You can adjust several print settings by opening the G-code in any text editor. Personally, I use VS Code. 

To find the editable settings, search the G-code for “Editable Code Start.” This marks the beginning of the section where the settings can be adjusted.

;—————————–Editable code start
; M221 set flow rate
; this can be adjusted to fix under or over extrusion problems without re-exporting g-code
; e.g. M221 S120 will increase to 120% the amount of plastic coming out the nozzle
M221 S100; flow rate 100%
M220 S100; 100% speed
M104 S245; heat nozzle to PETG temp
;——————————-Editable code end

For Lattice Prints – The fan is switched off at the start, I switch it on later in the print to help the lattice cool.

Need Help?

Email hello@claywoven.com if you have any questions or need help with your print.

Commercial Use

For commercial use, please subscribe to the Commercial License tier on Patreon or email hello@claywoven.com to discuss licensing options.

Thank you for supporting Claywoven. Your support is what makes this work possible.