Squeezy Fidget Toy G-Code

Description

This is a G-code download, it is not a file that can be sliced. It needs a 0.8 nozzle. This cannot be changed.

It will need to be loaded directly to your printer. I have tested it on an A1 mini, an H2S and it works well, although In enclosed printers you will  need to keep the door open to let the print cool for the lattice to work well.

It failed to print on a ender 3 due to the clearance needed between the part cooling fan and the nozzle position. You need about 5mm clearance between the nozzle tip and the part cooling fans.

• It prints well in standard PETG,  I was using eSun translucent.
• You will need to be sure your PETG is fully dry, small bubbles will brake the print. I had good success when after drying filament over night.
• You can open the g-code file in a text editor and adjust the print speed and flow rate and print temperature, using the settings below.
• As this is a generic G-code file, it will not open in Bambu studio, to print it you will need to load it on your printer directly via USB or SD card.

If you open the g-code in a text editor, you will see a section at the start you can use to adjust print speed, flow rate and print temperature, the Fan is switched off at the start, I switch it on later in the print to help the lattice cool.