Description
What’s Included
- Available in two sizes, choose your size.
- G-code for the lamp body
- Clip-on base (.3mf) that can be sliced and printed separately
The included base features a print-in-place snap-fit design with integrated flexures. It securely holds both the lamp body and the light fitting while allowing repeated assembly and disassembly.
Excluded – IKEA KAPPLAKE, the USB-C Powered LED used in this project. Available for purchase on the IKEA webite.
Assembled Size
Sea Blast [Small] – 80mm Width, 265mm Height
Sea Blast [Large] – 80mm Width, 350mm Height
Before You Buy
- The lamp body is a G-code download, not an STL or 3MF model.
- The lamp body cannot be re-sliced or modified.
- A 0.8 mm nozzle is required.
- Designed for PETG printing.
How to Print
Use the printer-specific G-code whenever available:
A1 → A1 G-code, opens in Bambu Studio
H2S → H2S G-code, opens in Bambu Studio
Other printers → The lamp body is supplied as a generic G-code file. It can be previewed in most slicers, except Bambu Studio.
To print generic G-code, copy the G-code directly to your printer using an SD card or USB drive.
Customising G-code
You can adjust several print settings by opening the G-code in any text editor. Personally, I use VS Code.
;——————————- Editable code start
; This can be adjusted to fix under or over extrusion or speed issues, without having to re-slice the model.
; e.g. M221 S120 will increase to 120% the amount of plastic coming out the nozzle
M221 S100; flow rate 100%
M220 S100 ; 100% speed
M104 S245; heat nozzle to PETG temp in degrees C
;———————————— Editable code end
Need Help?
Email [email protected] if you have any questions or need help with your print.
Commercial Use
For commercial use, please subscribe to the Commercial License tier or email [email protected] to discuss licensing options.
Thank you for supporting Claywoven. Your support is what makes this work possible.
